With our new SPS boring bar we can now bore any type of motorcycle cylinders ranging from 32mm all way up to 92mm.
We can also accept distance orders if customer sends the cylinders to be bored along with the new oversize piston.
HONING, PORTING, VALVE GRINDING, PORT POLISHING AND CYLINDER FACING / SKIMMING CAN BE DONE ALSO!
We are also able to do ONE OFF’S PARTS IN OUR ENGINEERING workshop loaded with a Lathe and Milling Machine AND LOADS OF SPECIALTY EQUIPMENT
OUR BORING AND HONING PRICES ARE:
-SINGLE CYLINDER BORING ONE SIZE UP INCLUDING CROSS HATCH HONING (4 STROKE)
– TWIN CYLINDER BORING ONE SIZE UP INCLUDING CROSS HATCH HONING (4 STROKE)
-THREE OR FOUR CYLINDER BORING ONE SIZE UP INCLUDING CROSS HATCH HONING (4 STROKE)
ADD £10 / CYLINDER FOR TWO STROKE CYLINDERS DUE TO PORTS FINISHING (EDGE CHAMFER)
We use Delapena, Sunnen and Lisle specialist adjustable honing Tools in our workshop to ensure a good quality finish at all times.
Please be aware that parts sent in need to be cleaned prior sending or turning up. After the service is done, you will have it back in the same way, clean and cylinder wall lubricated to prevent rust.
If you need a custom part machined or made from scratch we can help .
We have a full engineering setup and highly skilled machinists with bikes in mind.
At Traxden Motorcycles we can fabricate and weld loads of parts, racks, battery boxes, exhausts, rearsets, and many more. We can weld most of ferrous and non-ferrous materials (aly, stainless…)
Come to us, share your idea and we will find a solution for your needs.
At Traxden Motorcycles we built quite a large number of clients for the quality of our services when modifications or restorations were needed, successfully completing projects and unique ideas.
Track bike conversions and restorations being our focus but café racers and streetfighters becoming more and more popular these days made us taking a different level of approach toward these jobs and we always say that if there is a good idea we will design it and do it!
Check on our Facebook page a special project we did in 2017: Domi Flat Cracking Traxden Tracker
There is no such thing impossible really, as long as common sense is used then look no further
Call us to discuss your needs: 020 8617 8288 / 0754 5321797
At Traxden Motorcycles we can alter/Modify your recently purchased exhaust to fit you bike. (As long as common sense is used). Obviously new exhaust systems can be supplied by us but if you choose to go on a different route –We can help you!
Also we supply exhaust systems from leading manufacturers such as:
Akrapovič , Yoshimura, Arrow, Two Brothers, Motad, Devil, Leo Vince, Delkevic, Austin Racing and many more…
Many of us riders we are confused about suspension settings, we hear lots of people setting up bikes suspension based on advice and you tube videos and forums. Our opinion: Not a bad idea and if you know what you are doing –why not save some pennies?
Results: some people will feel better on the bike some not at all, some do not notice differences and give up.
We are qualified and trained, we know what we are doing when is a matter of suspension settings and modifications/alterations.
If you have any concerns about your Road/Race/Track bike suspension pop in to us and we will do our best to get the bike setup for your needs and all work will be done with you on the bike and you can see, get some knowledge and understand what we do on your bike.
You’ll be amazed with the results -guaranteed or money back
We work, and can get suspension components from the leading manufacturers in the world such as Öhlins Advanced Suspensions Tecnology, Showa, K-tech, Kayaba Shock Absorbers, Marzocchi, WP Suspensions, Hyperpro, Nitron, YSS Suspensions, and many more…
We also have our own Traxden Suspensions!
Is your motorcycle in need of service or repairs?
We service and repair all types of motorcycles & scooters. Give us a call or visit our garage.